BT-8310 Universal Plasma Screen flush mount

Flat Wall Mounts are the most common mounting option for Plasma TVs for home or business use. This option is the least expensive and allows the plasma monitor to remain closest to the wall, adding only 1.5 inches to the depth. It is used in the home living room or the company boardroom to achieve the sleek appearance for which plasma TV have come to be known.

The above flat wall mount bracket has a slim-line design for an attractive and unobtrusive appearance. Flat wall mounts offer solutions for your "close to the wall" plasma mounting installations.

This unit is designed for plasma TV screens 30 to 55 inches and up to 150 lbs. example: Sony, Pioneer, Akia, NEC, Hitachi. Unit can be mounted to wall studs with 16", 20", and 24" centers. Horizontal side-to-side adjustment range of 6" left or right of center. Screen can be mounted horizontally or vertically. Theft-resistant security fasteners secure the screen to the mount
Adds approximately 1.5" to the depth of the screen
Hardware for wood stud and concrete installation included. 88 piece kit of mounting screws and spacers for mounting to any type of plasma screen. this is a complete kit with wall mount and plasma mount. (many manufacturers sell their units as two separate units). Warning: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weight of all attached equipment and hardware.

works with the following mounting patterns
VESA 600mm x 400mm
VESA 200mm x 200mm
Vesa 200mm x 100mm